When the YueQi mc club needed biker pins to showout its spirit, they contacted MCS. They knew that we do more than just making pins fast. We also sculpt high quality lapel pins for many other clubs.  We are proud of our heritage and thankful for our many blessings. It was a pleasure to fulfill our duty as graphic designers in the design and production of these custom biker lapel pins.

3-D Spin Casted Pins

To make these pins 3-D, we needed to use a method that is different from die-striking. 3-D spin casting is the method of production necessary when pins need a very three-dimensional appearance. Spin casting is the process of spinning a molten metal into a mold. The process was actually shown on the popular discovery science channel show, “How It’s Made“.
When you see the elaborate process required to manufacture 3-D lapel pins you can begin to appreciate their incredible value. That is only part of the story however, designing the 3-D lapel pins is the other part of the story – presented here:

First, The graphic designer uses an image from the customer’s website as a template. The artist traces over this image as closely as possible. Then, the graphic designer painstakingly draws the areas of topography in order to describe the ups and downs of the 3-d image. This process can take several hours for a highly detailed 3-D lapel pin. The finished topography will guide the sculptor who creates the mold by hand.
After the graphic designer creates the topography of the lapel pins the Pantone colors are specified. Sunken or recessed areas in the design are specified and given a Pantone color. Color filling is also done by hand, and so in this case it also helps to have a guide created by the graphic designer.

Antiqued Metal Finishes

After the lapel pins are 3-d spin casted – they are plated with bronze metal. The bronze is “antiqued” in order to give an oxidation effect. The antique effect is achieved by using a dark die to stain the bronze metal. The stain is then brushed away but remains inside the deeper grooves and recessed areas of the pin. These darker areas help to define the image and give it more character and emphasis.

If you would like us to create custom biker pins, give MCS a try today with a free pin design and quote.